SANITARY CENTRIFUGAL PUMPS WITH OPEN IMPELLER

Packo FP60 Series

The FP60 series are sanitary centrifugal pumps at competitive prices with pump casing in cold-rolled non-porous stainless steel AISI 316L and cast impellers in AISI 316L. Thanks to the cleanable design without dead ends and narrow passages, as well as very smooth electropolished surfaces, the pump is the ideal choice for processes where high demands are placed on hygiene and operational reliability.

Typical Applications

The FP60 series is primarily used for pumping clean and slightly particle-containing media from dairies, cheese production, breweries, distilleries, as well as general applications where high demands are placed on hygiene and cleanability.They are often used as process pumps for pumping through plate heat exchangers, filtration units, filling machines, brine injection, and CIP systems. Typical media include milk, whey, curds, batter, brine, beer, CIP water, alcohol, etc.

brochure

Technical design and benefits

Electropolished cleanable construction, no bacterial pockets and no narrow passages that are difficult to clean
Pressed cold-rolled plate in 2B quality plate, extremely smooth
Large seal chamber ensures good circulation around the shaft seal
Monobloc design with standard IEC standard motors
FDA & EC1935/2004 approved mechanical shaft seals

Service videos

Installation of bellows seal

FP60, NP60

Assembly of bellows seal with flush

FP60, NP60

Replacement of bellows seal

FP60, NP60

Type	Maks. kapacitet	Maks. differenstryk	Maks. indløbstryk	Maks. temperatur	Certifikater	Maks. partikelstørrelse
FP60	40 m3/h	27 m wc	3 bar	95 °C	1935/2004 EC. MEI. ATEX. FDA. EAC	15 mm
FP1	55 m3/h	40 m wc	6 bar	140 °C	1935/2004 EC. MEI. ATEX. FDA. EAC	18 mm
FP2	110 m3/h	220 m wc	13 bar	140 °C	1935/2004 EC. FDA. USP. ATEX. MEI. EAC	22 mm
FP2+	110 m3/h	110 m wc	13 bar	140 °C	3A. 1935/2004 EC. FDA. USP. ATEX. MEI. EAC	22 mm
FP3	320 m3/h	120 m wc	15 bar	140 °C	EHEDG. 1935/2004 EC. FDA. USP. ATEX. MEI. EAC	21 mm
MFP2	120 m3/h	65 m wc	10 bar	140 °C	1935/2004 EC. FDA. USP. ATEX. MEI. EAC	25 mm
MFP3	1800 m3/h	75 m wc	12 bar	140 °C	1935/2004 EC. FDA. USP. ATEX. MEI. EAC	27 mm
FPP2	110 m3/h	110 m wc	40 bar	140 °C	1935/2004 EC. FDA. EAC	22 mm
FPP3	200 m3/h	70 m wc	40 bar	140 °C	1935/2004 EC. FDA. EAC	17 mm
FMS	50 m3/h	160 m wc	8 bar	140 °C	1935/2004 EC. ATEX. FDA. EAC	14 mm
CRP	120 m3/h	75 m wc	10 bar	140 °C	EHEDG. 1935/2004 EC. FDA. USP. ATEX. EAC	22 mm
CRP+	105 m3/h	75 m wc	13 bar	140 °C	3A. 1935/2004 EC. FDA. USP. ATEX. EAC	22 mm
GFP	400 m3/h	30 m wc	10 bar	140 °C	FDA. EAC
RMO	250 m3/h	30 m wc	10 bar	140 °C	EHEDG. 1935/2004 EC. FDA. USP. MEI. EAC	25 mm
MSCP	40 m3/h	75 m wc	5 bar	140 °C	1935/2004 EC. FDA. EAC. USP

Any questions?

Find out more about Centrifugal Pumps and FP60 from Lobe

Our technical sales staff looks forward to your inquiry!