SANITARY CENTRIFUGAL PUMPS IN BLOCK DESIGN

Packo FP1 series

The FP1 series are sanitary centrifugal pumps at competitive prices with pump housing in cold-rolled non-porous stainless steel AISI 316L and cast impellers in AISI 316L. Thanks to the cleanable design without dead ends and narrow passages as well as very smooth electropolished surfaces, the pump is the ideal choice for processes that require high standards of hygiene and reliability.

Typical applications

The FP1 series is primarily used for pumping clean and slightly particle-laden media from dairies, cheese production, breweries, distilleries, as well as general applications where high standards of hygiene and cleanability are required.They are often used as process pumps to pump through plate heat exchangers, filtration units, filling machines, brine injection, and CIP systems. Typical media includes milk, whey, curd, dough, brine, beer, CIP water, alcohol, etc.

brochure

Technical design and benefits

Electropolished hygienic construction, no bacterial pockets and no narrow passages that are difficult to clean
Pressed cold-rolled steel plate in 2B quality, extremely smooth
Large seal chamber ensures good circulation around the seal
Monobloc design with standard IEC standard motors
FDA & EC1935/2004approved mechanical seals
One seal diameter for the entire series: Ø33 mm

Service videos

Installation of bellows seal

FP1, ICP1

Installation of sterile sealing

FP1, ICP1

Replacing the bellows seal

FP1, ICP1

Replacement of sterile seal

FP1, ICP1

Type	Maks. kapacitet	Maks. differenstryk	Maks. indløbstryk	Maks. temperatur	Certifikater	Maks. partikelstørrelse
FP60	40 m3/h	27 m wc	3 bar	95 °C	1935/2004 EC. MEI. ATEX. FDA. EAC	15 mm
FP1	55 m3/h	40 m wc	6 bar	140 °C	1935/2004 EC. MEI. ATEX. FDA. EAC	18 mm
FP2	110 m3/h	220 m wc	13 bar	140 °C	1935/2004 EC. FDA. USP. ATEX. MEI. EAC	22 mm
FP2+	110 m3/h	110 m wc	13 bar	140 °C	3A. 1935/2004 EC. FDA. USP. ATEX. MEI. EAC	22 mm
FP3	320 m3/h	120 m wc	15 bar	140 °C	EHEDG. 1935/2004 EC. FDA. USP. ATEX. MEI. EAC	21 mm
MFP2	120 m3/h	65 m wc	10 bar	140 °C	1935/2004 EC. FDA. USP. ATEX. MEI. EAC	25 mm
MFP3	1800 m3/h	75 m wc	12 bar	140 °C	1935/2004 EC. FDA. USP. ATEX. MEI. EAC	27 mm
FPP2	110 m3/h	110 m wc	40 bar	140 °C	1935/2004 EC. FDA. EAC	22 mm
FPP3	200 m3/h	70 m wc	40 bar	140 °C	1935/2004 EC. FDA. EAC	17 mm
FMS	50 m3/h	160 m wc	8 bar	140 °C	1935/2004 EC. ATEX. FDA. EAC	14 mm
CRP	120 m3/h	75 m wc	10 bar	140 °C	EHEDG. 1935/2004 EC. FDA. USP. ATEX. EAC	22 mm
CRP+	105 m3/h	75 m wc	13 bar	140 °C	3A. 1935/2004 EC. FDA. USP. ATEX. EAC	22 mm
GFP	400 m3/h	30 m wc	10 bar	140 °C	FDA. EAC
RMO	250 m3/h	30 m wc	10 bar	140 °C	EHEDG. 1935/2004 EC. FDA. USP. MEI. EAC	25 mm
MSCP	40 m3/h	75 m wc	5 bar	140 °C	1935/2004 EC. FDA. EAC. USP

Any questions?

Find out more about Centrifugal Pumps and FP1 from Lobe

Our technical sales staff looks forward to your inquiry!